Nube iO - Rubix Compute: Legacy Power Requirements and Wiring

Rubix Compute: Legacy Power Requirements and Wiring


WARNING: This article is intended for Rubix Compute devices version 0.8 and below.
To determine the device version of Rubix Compute, see: Rubix Compute: Identifying Hardware Version

Power Supply Requirements


Power Supply Wiring

Versions 0.8 and below devices CAN ONLY BE POWERED BY DC. Using AC power will damage or destroy your device.

The Nube-iO Rubix Compute Gateway Controller is powered by a 24v DC power supply on the `24 DC POWER` terminals as shown below. 
Wiring Diagram:




    • Related Articles

    • Rubix Compute: Power Requirements and Wiring

      Warning:  Power requirements are different for older models of Rubix Compute. To determine the device version of Rubix Compute, see: Rubix Compute: Identifying Hardware Version If Rubix Compute hardware is Version 0.8 or below, DO NOT FOLLOW the ...

    • Rubix iO: Power Requirements and Wiring

      Power Supply Requirements Power Supply Wiring The IO Module is powered by a 24v AC or DC power supply on the `24 AC/DC POWER` terminals as shown below. Wiring Diagram: Related Articles Edge28: Power Requirements and Wiring Rubix Compute: Power ...

    • Rubix Compute: Overview

      Hardware Overview Power Supply Requirements Power Supply Wiring The Nube-iO Rubix Compute Gateway Controller is powered by a 24v AC or DC power supply on the `24 AC/DC POWER` terminals as shown below. Wiring Diagram: Mounting The Rubix Compute 5 is ...

    • Edge iO 28: Power Requirements and Wiring

      Power Supply Requirements Supply Voltage 24v AC/DC Current Requirement 700 mA Minimum Transformer Size  17 VA Power Supply Wiring The Edge28 can be powered by 24 volts AC or DC.  The 0v wire from the power supply should be connected to the ...

    • Rubix Compute: Installation and User Manual

      Please download the document attached below.