Rubix CE: Modbus Integration
Install the flow-framework app
Important things to note before proceeding:
Important things to note before proceeding:
Rubix-Compute 485 ports
Important things to note before proceeding:
485-1: /dev/ttyUSB0
485-2: /dev/ttyAMA0
485-SIDE: /dev/ttyAMA0
Using the IO-16
Important things to note before proceeding:
Modbus over LoRa (1x off)
App: via flow-framework modbus plugin
timeout: 1
port: /data/socat/serialBridge1
parity: none
speed: 38400
delay on pollings (ms): 6000ms (set the modbus polling for normal speed as 6 seconds)
Related Articles
Rubix CE: Overview
Rubix Computer Edition (CE - Overview) Rubix Platform CE is Nube iO's new desktop software designed for offline programming and product management. Built to be fast, lightweight and portable, it allows users and technicians to configure and modify ...
Rubix iO: Modbus RS485 Wiring
Nube-iO Rubix IO Modules are a pure Modbus device; All communications with the IO Modules are via Modbus. This article will detail the correct wiring for the Modbus RS485 Network. To communicate via Modbus the Rubix IO Module must also have its ...
Rubix iO: Configuring Modbus Communications Parameters
In order to communicate via Modbus the IO Modules must be configured correctly. The Modbus ID/Address, Baud Rate, and Parity must be configured correctly to communicate over the Modbus RS485 Network. Preparation Rubix IO: Modbus RS485 Wiring ...
Rubix Platform: Modbus Network Configuration
This article explains how to configure the Modbus Network within Rubix Platform. This will allow us the send and receive Modbus data from connected Modbus devices. Ensure Modbus Service is Running It is important to ensure that the Modbus Service is ...
Rubix Compute: Modbus RS485 Wiring
Modbus RS485 Terminal Wiring To establish communication with Modbus RS485 devices, the RS485 connectors are terminated and installed as shown below. Modbus RS485 Networking When Networking multiple devices on an RS485 network, each ...