Rubix CE: Installing Apps

Rubix CE: Installing Apps

Overview


Installing apps will add zip files in your user home directory  "/home/my-user/rubix/store/apps"
A token must be added so the apps can be downloaded over the internet, the token is provided from Nube-IO support and is valid for up one year

Adding a token

with the provided token please paste in into the token section in the settings

Managing apps

Apps are installed on the Rubix-compute, much like any normal app on a PC or a cell phone. 

Example of Nube apps:
  1. BACnet-server
  2. LoRaWAN protocol 
  3. Rubix-Wires

To install an app

  1. Make sure a token is added see the settings section add add token
  2. Click on the plus (+) icon add dropdown the apps manager
  3. Once in the apps manager you can install, uninstall or start, stop and restart an app

Apps/Service Status


On the respective tab for Apps/Services: There are tiles displayed; one for each installed App.   The coloured status label, displayed on each tile, shows the current status of the service:
  1. `Running` (Green) -  means that the app/service is currently running.
  2. `Inactive` (Yellow) - means the app/service is not running (may have crashed or not be enabled).
  3. `Stopped` (Red) - means the app/service is not running (may have crashed or not be enabled).
  4. `Activating` (Yellow) - means the app/service is starting, but is not yet running.

Enabling Apps/Services

On the respective tab for Apps/Services:  To Enable an App/Service, toggle the `Enable` switch on the required service to the ON position.  Enabling an App/Service will mean that the service will start on controller reboot.  To start an App/Service you must also click the `Start` button.

Starting Apps/Services

On the respective tab for Apps/Services:  To start an App/Service, click the `Start` button on the required service.  Refresh the page to  next to see the updated the status of the app/service and confirm that the desired app/service is now running.

Restarting Apps/Services

On the respective tab for Apps/Services:  To restart an App/Service, click the `Restart` button on the required service.  Refresh the page to  next to see the updated the status of the app/service and confirm that the desired app/service is now running (or starting).  You can see the `Active` label shows the time that the service has been running for.  After a restart, the Active time should be very low. 

Disabling Services

On the respective tab for Apps/Services:  To disable the App/Service, click the `Stop` button on the required service.  Refresh the page to  next to see the updated the status of the app/service and confirm that the desired app/service has been stopped (or is stopping).


Installing Apps/Services

Apps/Services can be installed by using the `Download` icon (down arrow) on the row of the app/service required.
  1. Click the green `Download` arrow button on the row of the app/service that is required to be installed.
  2. On the opening of the `App Status` pop-up, click on the blue `CONTINUE` button after verifying that it isn't installed (`Version` should be displaying -).
  3. Using the `Select Release Version` drop-down, select the desired version to install (usually the most recent version available) and then click the blue `DOWNLOAD` button.
  4. Wait until the downloading is completed, and that the green `Downloading Completed` status message is displayed. Verify that the correct version required is listed, and then click the blue `INSTALL` button.
  5. Wait for installation to be completed and for `Installation Complete` to be displayed. Click `OK` to finalise installation.

Updating Existing Apps/Services

Updating existing apps/services is very similar to installing apps/services. The only difference is that the `Version` displayed will be the currently installed version.
  1. Click the green `Download` arrow button on the row of the app/service that is required to be updated.
  2. On the opening of the `App Status` pop-up, click on the blue `CONTINUE` button a(`Version` should be displaying the currently installed version).
  3. Using the `Select Release Version` drop-down, select the desired version to install (usually the most recent version available) and then click the blue `DOWNLOAD` button.
  4. Wait until the downloading is completed, and that the green `Downloading Completed` status message is displayed. Verify that the correct version required is listed, and then click the blue `INSTALL` button.
  5. Wait for installation to be completed and for `Installation Complete` to be displayed. Click `OK` to finalise installation of the updated version.


Uninstalling or Deleting Apps/Services

Apps/Services can be uninstalled and deleted using the red `DELETE` bin icon (under the `Actions` column) on the row of the app/service wishing to be removed.  Once the red `DELETE` bin icon is clicked, a confirmation window confirming deletion pops-up.  Click `YES` to delete the app/service. Wait for the process to complete, and the page will automatically refresh.  Ensure the app/service has been successfully removed.

    • Related Articles

    • Rubix Platform: Managing Apps/Services

      Rubix Platform provides utilities to install, update, and manage the various Apps and Services that run on the Rubix Controller.  Preparation: Rubix Platform: Navigation Rubix Platform: Access and Login Available Apps and Services Apps Apps are ...

    • Rubix CE: Overview

      Rubix Computer Edition (CE - Overview) Rubix Platform CE is Nube iO's new desktop software designed for offline programming and product management. Built to be fast, lightweight and portable, it allows users and technicians to configure and modify ...

    • Rubix Compute: Installation and User Manual

      Please download the document attached below.

    • Rubix Platform: Getting Started Guide

      Introduction To Rubix Platform Rubix Platform is the browser based user interface for many of the Nube-iO services. Rubix Platform is the main management tool for configuring Local/Remote Device Settings, Sensor Gateway Connectivity, Data Management, ...

    • Rubix CE: Getting Started

      Adding a token to download apps and services with the provided token please paste in into the token section in the settings Adding a connection (adding rubix-assist port:1662 or 443 for cloud) The Rubix-Platform-CE application can be used to setup ...