Nube iO - Edge iO 28: Identifying Device Version

Edge iO 28: Identifying Hardware Version


The Nube-iO Edge28 controller has had a number of hardware improvements since its release.  It is important to know which version of the Edge28 you are working with so that the correct verions of manuals and documentation are used.  Using mismatched devices and documents can result in damage to the device or non-functional configurations.

Identifying Hardware Version

The Edge28 hardware version is printed on the base PCB at the bottom centre just above the Digital Output (DO) pins.   The front case of the Edge28 must be removed to view the PCB and version number.  See diagram below.

  1. Edge iO 28: Power Requirements and Wiring
  2. Edge iO 28: Installation and User Manual
  3. Edge iO 28: Dimensions and Mounting




    • Related Articles

    • Droplet: Identifying Hardware Version

      The Nube-iO Wireless Droplet sensor has had a number of hardware improvements since its release.  It is important to know which version of the Droplet you are working with so that the correct verions of manuals and documentation are used.  Using ...

    • MicroEdge: Identifying Device Version

      The Nube-iO Wireless MicroEdge sensor has had a number of hardware improvements since its release.  It is important to know which version of the MicroEdge you are working with so that the correct verions of manuals and documentation are used.  Using ...

    • Rubix Compute: Identifying Hardware Version

      The Rubix Compute has had a number of hardware improvements since its release.  It is important to know which version of the Rubix Compute you are working with so that the correct verions of manuals and documentation are used.  Using mismatched ...

    • Rubix iO: Installation and User Manual

      Please download the document attached below.

    • Rubix iO: Modbus RS485 Wiring

      Nube-iO Rubix IO Modules are a pure Modbus device; All communications with the IO Modules are via Modbus.  This article will detail the correct wiring for the Modbus RS485 Network.  To communicate via Modbus the Rubix IO Module must also have its ...