Rubix Wires is a browser-based user interface.  It can be accessed on any supported web browser (Chrome, Firefox, Safari, Internet Explorer, ...)  by entering the IP Address, and Port Number [1313] in the browser's URL address bar.

To open Rubix Wires first type in the IP address where Rubix Wires is running: this could be on a controller, a PC, or a web server.  Next type a Colon [ : ].  Finally type the Port Number; the default port number for Rubix Wires is 1313. The URL Address should take the following form <IP Address>:<Port Number>

For example: 192.168.15.10:1313

Note:  The IP Address or Port Number may be different if Rubix Wires is being accessed through a router or networking service with port forwarding enabled.

If the device's IP address is unknown try the following:

1. If you are accessing Rubix Wires on a Nube-iO Rubix Compute controller try IP Address 192.168.15.10 with the ETH-2 ethernet port connected to your PC. OR connect the ETH-1 ethernet port to your router and check your router DHCP devices for the IP Address.   For further information see Rubix Platform: Access and Login.
   
2. Try to use an IP scanning tool such as Angry IP Scanner or Advanced IP Scanner to find the device's IP address.
   
3. Contact a network administrator to check the networking details for the device running Rubix Wires.
   

Login with User Credentials

Once you have navigated to Rubix Wires, if you have not signed-in recently, a login screen will appear, prompting for a username and password.

Note: If the username and password have not been changed, they will be the default values. The default username is admin and the default password is N00BWires (note there are 2 Zeros in N00B).