Rubix-Edge-Wires: Settings
Settings Overview
Flow-Settings
- Show/Hide flow mini map
- Set the refresh speep (how often the node values are updated)
Flow Help
Lets the keypad shortcuts of the editor
Importing/Exporting Settings
Importing
You can use the import icon or ctrl-i
Importing
You can use the export icon or ctrl-i
Related Articles
Rubix-Edge-Wires: Adding schedules
Adding a schedule in Rubix-Edge-Wires Important things to note before proceeding: make sure flow-framework and rubix-edge wires are both installed and running Step 1: On the device level, click into the 'schedules' icon on the side bar and click the ...Rubix Compute: Overview
Hardware Overview Power Supply Requirements Power Supply Wiring The Nube-iO Rubix Compute Gateway Controller is powered by a 24v AC or DC power supply on the `24 AC/DC POWER` terminals as shown below. Wiring Diagram: Mounting The Rubix Compute 5 is ...Rubix Compute: Installation and User Manual
Please download the document attached below.Rubix Platform: Overview
Introduction To Rubix Platform Rubix Platform is the browser based user interface for many of the Nube-iO services. Rubix Platform is the main management tool for configuring Local/Remote Device Settings, Sensor Gateway Connectivity, Data Management, ...Rubix-Edge-Wires: iO-16 as a wired BACnet Device
Overview Adding a Rubix iO-16 can now be added simply using the BACnet app in Rubix Wires, meaning there is no need to configure and add the inputs / outputs as modbus registers. Important things to note before proceeding: 1. The iO modules need to ...