This video will demonstrate how to convert a third party LoRaWAN device into a discoverable BACnet point. For this example, we've used an Elsys ELT sensor. To set the sensor up we've used these settings using the ELSYS Sensor Settings app here.
Step 1: At the device level, click 'drivers' on the sidebar, and then under the 'modules' tab, toggle the switch to download the LoRaWAN plugin Step 2: Ensure the LoRaWAN plugin is enabled Step 3: Click the config button and then enter the Chripstack ...
This article describes the process of mapping LoRa Points to Rubix Points. This is done in order to store history logs of the LoRa sensor data. Preparation Rubix Platform: Navigation Rubix Platform: Adding and Editing Wireless LoRa Droplet Sensors ...
This Appication Guide is intended to teach the complete process of getting wireless LoRa (RAW) sensor data from Droplet or MicroEdge sensors into Rubix Wires for use in custom control logic/programs. Preparation To complete this Application Guide ...
This Appication Guide is intended to teach the complete process of getting wireless LoRa (RAW) sensor data to the dashboard (or influx/postgres) for visualization. Preparation To complete this Application Guide you will need to be familliar with the ...