If you want to add the Rubix Compute controller as a discoverable BACnet device in a JACE or any other BACnet discovery tool, this video will guide you through the process.
This page will demonstrate setting up the Rubix Compute as a BACnet Master device, discovering BACnet devices and then adding / writing points to the controller. Step 1: On the controller level, under 'drivers', click the 'create' button to select ...
This article describes the process of automatically mapping either LoRa or Modbus points to BACnet points. A LoRa THL droplet and an Rubix iO-16 (UI1 and DO1 added only) has been used as an example of a LoRa and Modbus device respectively. ...
The Rubix compute supports being setup as a BACnet server and has the ability of acting as a BACnet gateway, enabling the controller to sit on any BACnet network and accept commands from BACnet master devices. Preparation Rubix Platform: Navigation ...