Converting LoRa sensor points to BACnet

Converting LoRa sensor points to BACnet

Now that you've added the LoRa sensors into the Rubix Platform, follow the tutorial below to convert the LoRa sensors to BACnet.


    • Related Articles

    • Converting LoRaWAN sensor points to BACnet

      This video will demonstrate how to convert a third party LoRaWAN device into a discoverable BACnet point. For this example, we've used an Elsys ELT sensor. To set the sensor up we've used these settings using the ELSYS Sensor Settings app here.

    • Rubix Platform: Mapping LoRa Points to Rubix Points

      This article describes the process of mapping LoRa Points to Rubix Points.  This is done in order to store history logs of the LoRa sensor data. Preparation Rubix Platform: Navigation Rubix Platform: Adding and Editing Wireless LoRa Droplet Sensors ...

    • Application Guide: LoRa Sensor Data to Rubix Wires

      This Appication Guide is intended to teach the complete process of getting wireless LoRa (RAW) sensor data from Droplet or MicroEdge sensors into Rubix Wires for use in custom control logic/programs.   Preparation To complete this Application Guide ...

    • Application Guide: LoRa Sensor Data to a Dashboard

      This Appication Guide is intended to teach the complete process of getting wireless LoRa (RAW) sensor data to the dashboard (or influx/postgres) for visualization.  Preparation To complete this Application Guide you will need to be familliar with the ...

    • Rubix Platform: Mapping Modbus & LoRa points to BACnet Points

      This article describes the process of automatically mapping either LoRa or Modbus points to BACnet points. A LoRa THL droplet and an Rubix iO-16 (UI1 and DO1 added only) has been used as an example of a LoRa and Modbus device respectively.  ...