Nube-iO - Application Guide: LoRa Sensor Data to Rubix Wires

Application Guide: LoRa Sensor Data to Rubix Wires


This Appication Guide is intended to teach the complete process of getting wireless LoRa (RAW) sensor data from Droplet or MicroEdge sensors into Rubix Wires for use in custom control logic/programs.  

Preparation

To complete this Application Guide you will need to be familliar with the following topics.  See the articles listed below to learn about the preparation requirements:

Application Process Summary

  1. Droplet: Installation and Configuration / MicroEdge: Installation and Configuration - First we must have our LoRa sensors correctly configured.  Refer to the linked articles to ensure that your LoRa devices have been set up and installed correctly. 
  2. Rubix Platform: LoRa Network Configuration - The LoRa Network (in Rubix Platform UI) must be set up correctly to receive LoRa data packets from the LoRa sensors.  Refer to the linked article to ensure that your LoRa Network has been configured correctly.
  3. Adding and Editing Wireless LoRa Droplet Sensors / Rubix Platform: Adding and Editing Wireless Microedge Sensors - Next we need to add the LoRa sensors to the Rubix Platform. Refer to the linked article to ensure that your LoRa sensors have been added to Rubix Platform Correctly.
  4. Rubix Wires: LoRa Sensor Nodes - Once we have the LoRa sensor data in Rubix Platform, we will need to access the sensor data from Rubix Wires. Refer to the linked article to learn how to add LoRa Sensor Nodes to the Rubix Wires program editor.  

  1. LoRa Wireless: Installation Best Practices
  2. Application Guide: LoRa Sensor Data to a Dashboard
  3. Application Guide: LoRa Sensor Data to BACnet Points




    • Related Articles

    • Application Guide: LoRa Sensor Data to a Dashboard

      This Appication Guide is intended to teach the complete process of getting wireless LoRa (RAW) sensor data to the dashboard (or influx/postgres) for visualization.  Preparation To complete this Application Guide you will need to be familliar with the ...

    • Rubix Wires: Getting Started Guide

      Introduction to Rubix Wires Rubix Wires is Nube-iOs browser based logical programming environment.  It is a function block flow editor, so there is no coding required to make advanced control and monitoring programs.  This type of visual programming ...

    • Rubix Platform: Getting Started Guide

      Introduction To Rubix Platform Rubix Platform is the browser based user interface for many of the Nube-iO services. Rubix Platform is the main management tool for configuring Local/Remote Device Settings, Sensor Gateway Connectivity, Data Management, ...

    • Rubix Platform: Overview

      Introduction To Rubix Platform Rubix Platform is the browser based user interface for many of the Nube-iO services. Rubix Platform is the main management tool for configuring Local/Remote Device Settings, Sensor Gateway Connectivity, Data Management, ...

    • Rubix Wires: LoRa Sensor Nodes

      This article describes the Rubix Wires nodes that are in the LoRa category.  Preparation Rubix Wires: Getting Started Guide Rubix Platform: Adding and Editing Wireless LoRa Droplet Sensors Rubix Platform: Adding and Editing Wireless Microedge Sensors ...