Adding Lora Sensors to the Rubix Compute

Adding Lora Sensors to the Rubix Compute

NubeiO has two main types of Lora sensors that can be easily integrated into the Rubix Compute controller; the Lora Droplet or the Micro Edge. These two videos below will show you how simple it is to add either a Lora droplet or a Micro Edge to the Rubix Compute Platform. 

Adding a LoRa Droplet to the Rubix Platform



Adding a Micro Edge to the Rubix Platform


    • Related Articles

    • Rubix Platform: Adding and Editing Wireless LoRa Droplet Sensors

      To receive data from Nube-iO Droplet Sensors they must be added to Rubix Platform.   To begin ensure that your Droplet sensors have been configured correctly; see Droplet Installation and Setup.  Droplet Sensors operate using LoRa wireless ...
    • Rubix Compute: Overview

      Hardware Overview Power Supply Requirements Power Supply Wiring The Nube-iO Rubix Compute Gateway Controller is powered by a 24v AC or DC power supply on the `24 AC/DC POWER` terminals as shown below. Wiring Diagram: Mounting The Rubix Compute 5 is ...
    • Rubix Compute: Installation and User Manual

      Please download the document attached below.
    • Rubix Platform: LoRa Network Configuration

      This article details how to configure the LoRa Network.  This will allow Nube-iO controllers, that are equipped with LoRa (RAW) radio cards, to act as Wireless LoRa (RAW) Gateways to receive data from Wireless LoRa Sensors.   Preparation Rubix ...
    • Rubix Compute: Datasheet

      Please download the document attached below.