Rubix Platform is a browser-based user interface. It can be accessed on any supported web browser (Chrome, Firefox, Safari, Internet Explorer, ...) by entering the IP Address, and Port Number [1414] in the browser's URL address bar.
To open Rubix Platform first type in the IP address where Rubix Platform is running: this could be on a controller, a PC, or a web server. Next type a Colon [ : ]. Finally type the Port Number; the default port number for Rubix Platform is 1414. The URL Address should take the following form <IP Address>:<Port Number>
For example: 192.168.15.10:1414
Note: The IP Address or Port Number may be different if Rubix Platform is being accessed through a router or networking service with port forwarding enabled.
If the device's IP address is unknown try the following:
- If you are accessing Rubix Platform on a Nube-iO Rubix Compute controller try IP Address 192.168.15.10 with the ETH-2 ethernet port connected to your PC. OR connect the ETH-1 ethernet port to your router and check your router DHCP devices for the IP Address. For further information see Connecting to a Rubix Compute.
- Try to use an IP scanning tool such as Angry IP Scanner or Advanced IP Scanner to find the device's IP address.
- Contact a network administrator to check the networking details for the device running Rubix Platform.
Once you have navigated to Rubix Platform, if you have not signed-in recently, a login screen will appear, prompting for a username and password.
Note: If the username and password have not been changed, they will be the default values. The default username is admin and the default password is N00BWires (note there are 2 Zeros in N 00B).
After successful login you will see the Rubix Platform user interface. To find out what to do next, please see Navigating Rubix Platform or Getting Started Guide: Rubix Platform for more information.